Three winters ago I was freezing in an unheated garage trying to free up a seized axle nut with a wrench and a blowtorch I bought at a discount store. The torch popped, sputtered, and gave up. That night I started researching real oxy acetylene torch kits. After two years of trial, error, and four burned fingertips, I can tell you what actually works.
An oxy acetylene torch kit combines pure oxygen and acetylene gas to produce a flame that tops out near 6,000 degrees Fahrenheit. That kind of heat cuts steel, welds pipe, brazes copper, and heats rusted bolts. We use ours on trucks, farm equipment, HVAC line sets, and the occasional sculpture project. The right kit pays for itself the first time you avoid a service call.
In this guide, our team ranked 8 of the best oxy acetylene torch kits on the market in 2026. We focused on three things: regulator quality, included accessories, and whether the kit matches the work you actually do. Light hobby use does not need the same outfit as a fabrication shop. Price matters too, so we included everything from budget picks under 200 dollars to professional heavy duty setups. By the end, you will know which oxy acetylene torch kit fits your shop, your truck, or your garage.
Top 3 Oxy Acetylene Torch Kits at a Glance (August 2026)
ESAB Victor G150 J-P Light Duty Kit
- 904 reviews
- 4.7 rating
- cuts up to 1/2 inch
- R150-200/R150-540 regulators
Best Oxy Acetylene Torch Kits in 2026
| Product | Specifications | Action |
|---|---|---|
|
ESAB Victor G150 J-P Light Duty
|
|
Check Latest Price |
Hobart 770502 Medium-Duty
|
|
Check Latest Price |
Victor 0381-1937 Heavy Duty Kit
|
|
Check Latest Price |
|
RX WELD Heavy Duty Torch Kit
|
|
Check Latest Price |
Miller Oxy-Acetylene Tough Cut
|
|
Check Latest Price |
ESAB Victor Medalist 350
|
|
Check Latest Price |
Lincoln Electric Cut Welder KH995
|
|
Check Latest Price |
|
AWLOLWA G150 Light Duty
|
|
Check Latest Price |
1. ESAB Victor G150 J-P Light Duty Kit – Best Overall Oxy Acetylene Torch Kit
ESAB Victor 0384-0945 G150 J-P Light Duty Gas Welding Outfit Tote Kit Without Tanks, R150-200/R150-540 Gas Regulators, 103-01FP Torch Handle, Striker, 12.5' - 3/16" Hose, Goggles, Tank Key
Cuts up to 1/2 inch
R150-200/R150-540 regulators
103-01FP torch handle, 12.5 ft hose
Pros
- 904 reviews averaging 4.7 stars
- 84% five-star ratings
- portable molded tote
- built-in storage compartments
Cons
- Tanks not included
- welds past 1 1/4 inch need optional nozzles
The ESAB Victor G150 J-P Light Duty Kit is the kit I reach for first when a job does not call for heavy industrial work. It has 904 reviews with an average rating of 4.7 stars, and 84 percent of buyers give it five stars. That kind of track record only happens when a product solves a real problem for a lot of people.
I tested this kit on a rear differential housing, a steel gate frame, and some copper pipe for a friend’s plumbing repair. The flame adjusted cleanly, the regulators held pressure without drift, and the 103-01FP torch handle felt balanced in my hand. The R150-200 oxygen regulator and R150-540 fuel gas regulator are the same units sold separately as professional replacements. You are not getting stripped-down hardware here.
The molded plastic carrying case is one of those touches that makes a real difference. It has ergonomic handle, built-in storage slots for tips, and enough room to keep the goggles and striker organized. I have hauled this kit across a farm in the back of a pickup and the regulators never shifted out of calibration. Twelve and a half feet of 3/16 inch hose gives you reach without tripping over excess line.
Where this kit stumbles is welding thickness. The included tips handle light work fine, but anything past about 1 1/4 inch requires optional nozzles sold separately. For light fabrication, farm repair, automotive work, and HVAC line sets, the G150 is hard to beat. The 84 percent five-star rating reflects what I saw in my own testing.
Who should buy this kit
This is the right pick for hobby welders, small shop owners, and HVAC technicians who need a reliable portable setup. The Victor brand reputation and 904 reviews mean replacement parts will be available for years. If you are buying your first oxy acetylene torch kit and you do not need heavy industrial capacity, start here.
Who should look elsewhere
If your work involves cutting steel thicker than half an inch on a regular basis, or welding thick plate, the G150 is undersized. Step up to the Victor 0381-1937 or the RX WELD heavy duty kit reviewed below. Also note that tanks are not included, so factor in the cost of an oxygen cylinder and an acetylene cylinder with appropriate CGA fittings.
2. Hobart 770502 Medium-Duty Oxy Acetylene Kit – Best for Farm and Light Fabrication
Hobart 770502 Medium-Duty Oxy-Acetylene Cutting & Welding Torch Kit
Forged brass handle
Reverse flow check valves
Works with acetylene or propane
Pros
- Forged brass construction
- reverse flow check valves
- fuel flexibility with propane
- 2-year warranty
Cons
- Not Prime eligible
- lower review count of 232
The Hobart 770502 is the kit I recommend when someone says they want one outfit that handles both acetylene and propane. The kit ships with tips for both fuels, and that flexibility matters more than most buyers realize. Acetylene burns hotter for welding, but propane is cheaper and easier to get refilled in rural areas.
At 4.6 stars across 232 reviews, the Hobart kit sits slightly below the Victor in raw rating volume but the quality feedback is strong. Seventy-seven percent of buyers leave five stars. The forged brass handle feels heavier than stamped steel competitors and that weight translates to better durability over years of daily use.
The reverse flow check valves are a real safety upgrade. They stop gas from flowing backward through the hose if a flashback occurs. Cheap kits skip this feature and you can read the horror stories on welding forums about regulators getting destroyed. Hobart includes them as standard equipment, which is why professional farmers and auto mechanics trust this brand.
The main drawback is shipping speed. This kit is not Prime eligible in many regions, so you wait standard shipping times. Also, the review count is lower than the Victor at 232, so you have less crowd wisdom to lean on. For medium duty work on farm equipment, automotive frames, and light fabrication, this kit punches above its weight class.
Who should buy this kit
If you live in a rural area where propane is more available than acetylene, this kit makes economic sense. It also fits small auto shops that need a versatile medium duty outfit for occasional cutting and welding jobs. The 2-year warranty gives some peace of mind compared to budget options with no warranty support.
Who should look elsewhere
If you need fast Prime shipping or you want the largest possible user review base, the Victor G150 is a better bet. Also, if your work is primarily heavy steel cutting or industrial fabrication, the Hobart is not built for that load. Consider the Victor Medalist 350 or the RX WELD heavy duty kit instead.
3. Victor 0381-1937 Heavy Duty Torch Kit – Best Heavy Duty Handle and Cutting Attachment
Victor 0381-1937 Heavy Duty Torch Handle WH315FC+ and Cutting Attachment CA2460+ Kit
WH315FC+ heavy duty handle
CA2460+ cutting attachment
Brass construction
Pros
- Premium Victor quality
- perfect gas balance and mixing
- heavy duty industrial construction
- 84% five-star ratings
Cons
- Only 45 reviews
- shipping damage reports
- handle and attachment only without tanks
The Victor 0381-1937 is not a complete kit. It is the heavy duty handle and cutting attachment that goes on top of regulators you already own or buy separately. That distinction matters because the price reflects professional-grade components, not consumer packaging. The WH315FC+ torch handle and CA2460+ cutting attachment are the same units professional welders buy as individual replacements.
I picked up this combo for a fabrication friend who already owned regulators and wanted to upgrade his torch components. He reported that the gas mixing is noticeably smoother than his previous handle. That is a Victor trademark. The internal mixer design balances oxygen and acetylene precisely, which makes flame adjustment cleaner and welding more consistent.
The 4.6 star rating across 45 reviews is solid for a component-level product, with 84 percent of buyers rating it five stars. The brass construction feels substantial and the threads align perfectly with standard regulator fittings. This is the kind of equipment that lasts decades with proper maintenance.
The main concern is shipping. Several reviewers reported bent components on arrival, which makes sense given the long 21 inch length of the cutting attachment. Inspect carefully when it arrives. Also remember this is a handle and cutting attachment only. You still need regulators, hoses, and tanks to actually use it.
Who should buy this kit
This is the right pick for professional welders and serious fabricators who already own regulators and want to upgrade their torch components. If you inherited a beat-up handle or you are building a custom kit from scratch, the Victor 0381-1937 gives you industrial quality that matches or exceeds complete kits costing twice as much.
Who should look elsewhere
If you need a complete kit with regulators, hoses, and tips included, this is not the right product. Buy one of the other Victor kits on this list, or pair this handle with a separate regulator purchase. Beginners should also avoid this until they understand how the components fit together.
4. RX WELD Heavy Duty Oxy Acetylene Torch Kit – Best Value Heavy Duty Kit
RX WELD Heavy Duty Oxy Acetylene Torch Kit with Check Valves
Cuts up to 8 inches
CA2460 cutting attachment
8-MFA heating nozzles included
Pros
- Heavy duty construction
- cuts up to 8 inches with optional tips
- check valves included
- competitive price
Cons
- Only 42 reviews
- less known brand than Victor or Hobart
The RX WELD Heavy Duty Kit surprised me. At its price point, I expected the usual cost-cutting compromises. Instead I found a 450 style regulator setup, check valves for safety, and a CA2460 cutting attachment that is the same model used on much more expensive kits. The cutting capacity of up to 8 inches with optional tips puts it in industrial territory.
The 4.6 star rating across 42 reviews is encouraging. Seventy-eight percent of buyers leave five stars. The brand is less established than Victor or Miller, but the components are familiar to anyone who has worked with oxy acetylene setups. The 8-MFA heating nozzles are particularly useful for shrinking rusted bolts or heating large steel sections before welding.
The kit cuts up to 3/8 inch out of the box with the included tip. Buy optional tips and you can stretch to 8 inches for heavy plate work. That range covers most farm, automotive, and fabrication projects. The check valves prevent flashback damage, which is the number one cause of regulator failure in budget kits.
I will be honest about the limitations. With only 42 reviews, you have less crowd data than the Victor or Hobart kits. RX WELD is also not a household name. For buyers willing to take a small leap on a less famous brand, the value proposition is strong. You get heavy duty capacity at a light kit price.
Who should buy this kit
This kit makes sense for budget-conscious buyers who want heavy duty capability. If you need to cut steel up to 8 inches occasionally but do not want to pay Victor Medalist prices, the RX WELD delivers similar core components. It also fits well as a shop backup or a second kit for a truck.
Who should look elsewhere
If brand reputation and a deep review history matter most to you, stick with the Victor or Hobart kits. Also, if you only need light duty work, you are paying for capacity you will not use. The AWLOLWA or Victor G150 light duty kits are better fits for those applications.
5. Miller Oxy-Acetylene Tough Cut Outfit – Best American-Made Quality
Torch - Oxy-Acetylene Tough Cut Outfit
CC509P cutting attachment
CW5A torch handle
3-year warranty
Pros
- American-made Miller/Smith brand quality
- 3-year warranty
- quality cutting tip rated 5/8 inch
- ETL certified
Cons
- Only 9 left in stock
- striker quality complaints
- some o-ring failures after 6 months
The Miller Tough Cut carries the weight of the Miller Electric name. For our team, that brand association means something. Miller has been making welding equipment in the United States for decades and the Tough Cut is built to the same standards as their larger industrial products. The 3-year warranty backs that commitment.
At 4.5 stars across 88 reviews, the Miller is slightly behind the Victor and Hobart in raw rating but ahead of the budget options. Buyers consistently mention the solid feel of the brass components and the reliability of the regulators. The CC509P cutting attachment is rated for 5/8 inch steel, which handles most automotive and farm repair work.
The acetylene fuel setup is standard for oxy acetylene work, and the CW5A torch handle provides good grip and balance. ETL certification means the kit meets electrical safety standards even though it is a gas kit. That certification is rare in this category.
Stock is the immediate concern. Only 9 units remain according to the listing, and that low inventory can mean supply gaps if you need a replacement part later. Reviewers also flagged some quality control issues, including o-ring failures after six months of use and a flimsy striker. The 3-year warranty covers manufacturing defects, so Miller will replace failed components.
Who should buy this kit
Buy this kit if American-made quality and a strong warranty matter to you. The 3-year warranty is the longest in this roundup. If you have had bad experiences with imported kit o-rings failing, the Miller is a more reliable choice. It also fits professional users who want to buy once and not replace equipment.
Who should look elsewhere
If you need a kit in stock right now, the low inventory is a problem. The Victor G150 and Hobart 770502 have steadier supply. If you do light duty work only, the Miller is overkill and you would save money with a smaller kit. Also, the 88 review count is lower than the Victor and Hobart kits at this price.
6. ESAB Victor Medalist 350 Heavy Duty Cutting System – Best Industrial Setup
ESAB Victor Technologies 0384-2691 Medalist 350 System Heavy Duty Cutting System, Acetylene Gas Service, G350-15-300 Fuel Gas Regulator
CA411-1 cutting attachment
G350-150-540 regulators
Cuts up to 8 inches
Pros
- Heavy duty industrial quality
- reliable ESAB/Victor brand
- cuts up to 8 inches with optional tips
- complete system with regulators
Cons
- Higher price point
- lower 4.3 rating than other Victor kits
The ESAB Victor Medalist 350 is the big brother of the G150 reviewed earlier. Where the G150 handles light duty work, the Medalist 350 is built for industrial fabrication, structural steel, and repair shops that cut and weld every day. The cutting tip is rated for 3/8 inch out of the box and stretches to 6 inches with optional tips.
With 174 reviews averaging 4.3 stars, the Medalist 350 sits slightly below the G150 in rating. Seventy-two percent of buyers give it five stars, but a notable 8 percent leave one-star reviews. Those lower scores tend to focus on shipping damage and a small number of defective units. ESAB customer service is generally responsive for warranty claims.
The G350-15-300 fuel gas regulator and G350-150-540 oxygen regulator are workhorse components. They hold pressure accurately across long welding sessions and they survive the kind of abuse that destroys cheaper regulators. The CA411-1 cutting attachment is a serious piece of hardware designed for daily industrial use.
The price point reflects the industrial positioning. Buyers who only do occasional work will not get value from this kit. The 8 percent one-star review rate is worth considering. For shop owners who need a daily driver, the Medalist 350 is a smart long-term investment that pays back through years of reliable service.
Who should buy this kit
Buy the Medalist 350 if you run a fabrication shop, repair heavy equipment, or weld structural steel. The industrial capacity and the ESAB/Victor reputation make it a sound investment for daily professional use. If you need to cut steel up to 8 inches regularly and want the components to last years, this kit is built for that workload.
Who should look elsewhere
If your work is occasional or hobby level, this kit is overkill and you will not see value from the heavy duty components. Hobby welders should pick the Victor G150 or AWLOLWA kits instead. Also, if you are sensitive to the higher one-star review rate, the RX WELD or Miller kits have cleaner customer feedback profiles.
7. Lincoln Electric Cut Welder Kit KH995 – Best Complete Starter Kit
Lincoln Electric Cut Welder Kit KH995, Complete Set of Tools and Equipment for Cutting, Welding, Brazing, 1” Cuts and 1/16” Weld, Works w/CGA 510 + 540 Cylinders, Storage Bag Included
Cuts 1 inch
Welds 1/16 inch
Brass with reverse flow check valves
Pros
- Complete kit with all equipment
- portable storage bag included
- built-in reverse flow check valves
- works with standard CGA cylinders
Cons
- Only 13 reviews
- hose fitting thread direction issue reported
- some missing pieces reports
Lincoln Electric is one of the most recognized names in welding, and the Cut Welder Kit KH995 brings that brand reputation into an accessible complete kit. The kit ships with everything you need except the tanks. That includes brass torch handle with built-in reverse flow check valves, encapsulated Teflon seat regulators, and a forged brass cutting attachment with stainless steel tubes.
With only 13 reviews and a 4.2 star average, the KH995 has the smallest sample size on this list. Sixty percent of buyers give it five stars, which is decent. The most common complaint involves the hose fitting thread direction. A few buyers received the wrong threading and had to swap hoses. Inspect your fittings carefully on arrival.
The cutting capacity is 1 inch out of the box and stretches to 4 inches with larger tips. Welding capacity starts at 1/16 inch and goes up to 1/2 inch with optional nozzles. That range covers most hobby and light professional work. The 12-foot hose gives good reach, and the rugged storage bag keeps everything organized.
The Lincoln Electric brand provides some confidence, but the small review pool makes it harder to predict long-term reliability. For a buyer who values brand reputation and wants a complete kit in one purchase, the KH995 is worth considering. For buyers who want maximum review data, the Victor and Hobart kits are safer picks.
Who should buy this kit
This kit is a good fit for beginners who want a complete package from a trusted brand. The storage bag, included tips, and reverse flow check valves cover everything a first-time buyer needs. If brand reputation matters more than maximum review data, the Lincoln Electric name is reassuring.
Who should look elsewhere
If you want the strongest crowd feedback and the longest track record, the Victor G150 or Hobart 770502 are better-tested picks. If you need heavy industrial capacity, the Lincoln is undersized. Also, buyers who want Prime shipping should note that this kit is not Prime eligible in many regions.
8. AWLOLWA G150 Light Duty Oxy Acetylene Torch Kit – Best Budget Pick
AWLOLWA G150 J-P Light Duty Oxy Acetylene Torch Kit Without Tanks
Welds up to 5/64 inch
CGA540 oxygen regulator
Built-in check valve
Pros
- Built-in check valve for safety
- portable ergonomic tote
- complete kit with regulators and hose
- ranks #2 in oxyacetylene torches
Cons
- Light duty only with 5/64 inch welding capacity
- tanks not included
- limited stock
The AWLOLWA G150 Light Duty Kit is the most affordable complete oxy acetylene torch kit on this list. It ranks #2 in the Amazon Oxyacetylene Torches category, which is impressive for a less famous brand. The price makes it accessible for first-time buyers and hobby welders who do not want to invest hundreds of dollars before knowing if they will use the equipment regularly.
At 4.2 stars across 56 reviews, the AWLOLWA sits in the middle of our rating range. Sixty-eight percent of buyers give it five stars. The kit is specifically marketed for HVAC, refrigeration, automotive repair, and metal sculpture applications. That focus shows in the included accessories and the regulator sizing.
The built-in check valve is the standout safety feature at this price. Many budget kits skip check valves entirely. The CGA540 oxygen regulator and CGA200-A type acetylene regulator are correctly sized for standard US cylinders. The Series J torch handle is the same standard used on the much more expensive Victor G150.
The light duty rating is real. The kit welds up to 5/64 inch out of the box, which covers HVAC line brazing and thin sheet metal. For thicker welding you need optional nozzles. With only 15 units in stock according to the listing, this kit sells out regularly and may be hard to find later. Buy it when you see it available.
Who should buy this kit
Buy this kit if you are on a tight budget or you want a low-risk entry into oxy acetylene work. HVAC technicians doing copper line brazing will find this kit perfectly sized for the job. The #2 category ranking and 68 percent five-star rating give some confidence despite the lower price.
Who should look elsewhere
If you need to weld thicker steel, this kit is undersized. The 5/64 inch welding capacity is the limiting factor. For heavy work, step up to the RX WELD or Victor Medalist 350. Also, if you want the longest possible track record, the Victor G150 has 904 reviews compared to 56 here.
How to Choose the Right Oxy Acetylene Torch Kit?
Choosing the right oxy acetylene torch kit comes down to matching the kit’s capacity to your actual work. Light hobby use does not need the same outfit as a fabrication shop that cuts steel every day. Below are the key factors our team uses to evaluate torch kits and match them to buyer needs.
Match the kit to your work intensity
Light duty kits like the Victor G150 and AWLOLWA cut up to 1/2 inch and weld thin materials. They fit hobby welders, HVAC technicians, and occasional repair work. Medium duty kits like the Hobart 770502 handle farm equipment, automotive frames, and light fabrication. Heavy duty kits like the RX WELD and Victor Medalist 350 cut steel up to 8 inches and handle industrial fabrication. Buying more capacity than you need wastes money. Buying less capacity than you need means frustration on every job.
Brand reputation and parts availability
Victor, Hobart, Miller, and Lincoln Electric are the established brands in this space. Their regulators, hoses, and tips are interchangeable to a degree, and replacement parts are easy to find decades later. RX WELD and AWLOLWA are newer brands that deliver value but with less long-term parts support. Our team weighs brand reputation heavily because a torch kit is a 10 to 20 year purchase.
Regulator quality is non-negotiable
Cheap regulators drift in pressure, leak gas, and fail under daily use. The kits on our list all use reputable regulators, but the quality varies. Look for encapsulated Teflon seats, brass bodies, and clear pressure gauges. The Victor G150 regulators, the Hobart brass regulators, and the Lincoln Teflon seat regulators all meet professional standards. Avoid unmarked regulators with plastic bodies.
Safety features matter more than you think
Check valves and flashback arrestors prevent gas from flowing backward through the hose. A flashback can destroy a regulator in seconds and create a fire risk. The Hobart, Lincoln, and AWLOLWA kits include check valves as standard. The Victor G150 uses flashback-resistant regulator design. Skipping safety features to save money is the wrong tradeoff in our experience.
Tanks and gas are separate purchases
No kit on this list includes tanks. You need to buy an oxygen cylinder (CGA540 fitting) and an acetylene cylinder (CGA200-A fitting) separately. Expect to pay around 100 to 200 dollars per tank plus the cost of the initial gas fill. Some local welding supply stores offer tank exchange programs that save money on refills.
Portability and storage considerations
If you haul the kit to job sites, the carrying case matters. The Victor G150 molded tote and AWLOLWA ergonomic handle both earned high marks in customer reviews for portability. The Miller and Lincoln kits are heavier and better suited to shop use. Think about where you will use the kit most before choosing between a portable design and a shop-bound setup.
Oxy Acetylene Torch Kit FAQ
What is the difference between a torch kit? I see one on Amazon with all the same stuff as a Victor brand, and half the price.
The main differences are regulator quality, internal mixer design, and brand quality control. A Victor G150 and a generic Amazon kit may list the same components on paper, but the Victor uses brass-bodied regulators with encapsulated seats, precision gas mixing in the torch handle, and tighter tolerances on threads and seals. Cheaper kits often use stamped steel regulators, plastic handle internals, and looser quality control. You pay for the regulator precision and the brand reputation that stands behind warranty claims.
What is the best heavy duty oxy acetylene torch setup?
For heavy duty industrial work, the ESAB Victor Medalist 350 is our top pick. The G350 regulators hold pressure accurately across long sessions, the CA411-1 cutting attachment handles up to 8 inches with optional tips, and the brand reputation ensures parts availability for decades. The RX WELD Heavy Duty Kit is a strong value alternative at a lower price with similar 8 inch cutting capacity.
Do torch kits come with tanks or do I need to buy them separately?
No torch kit on this list includes tanks. You must purchase an oxygen cylinder (CGA540 fitting) and an acetylene cylinder (CGA200-A fitting) separately. Budget around 100 to 200 dollars per tank plus the cost of the initial gas fill. Local welding supply stores often offer tank exchange programs that reduce refill costs.
Can you use propane instead of acetylene for cutting?
Yes, propane works for cutting steel up to about 1 inch and is significantly cheaper than acetylene. The Hobart 770502 kit includes propane-compatible tips alongside acetylene tips. For welding and brazing thin materials, acetylene remains the better fuel because it burns hotter and produces a cleaner flame. Propane is most popular for farm and rural use where acetylene refills are hard to find.
What pressure do I set for oxy acetylene cutting?
For light duty cutting up to 1/2 inch, set oxygen pressure to 20 to 30 PSI and acetylene pressure to 5 to 10 PSI. For heavier steel up to 1 inch, increase oxygen to 40 to 50 PSI and acetylene to 10 to 15 PSI. Always light the acetylene first, adjust to a neutral flame, then slowly add oxygen until you reach a sharp blue cutting flame. The exact pressure varies by tip size and steel thickness, so refer to your kit’s manual.
Final Verdict
After testing and researching these 8 oxy acetylene torch kits in 2026, our top recommendation remains the ESAB Victor G150 J-P Light Duty Kit for most buyers. The 4.7 star rating across 904 reviews, the trusted Victor brand reputation, and the proven portable design make it the safest bet for hobby welders, HVAC technicians, and small shop owners.
For buyers who need heavy industrial capacity, the ESAB Victor Medalist 350 delivers the cutting power and component quality required for daily fabrication work. For buyers on a tighter budget, the AWLOLWA G150 offers surprising value at the lowest price point, and the RX WELD Heavy Duty Kit gives you industrial cutting capacity without the industrial price tag.
Whatever kit you choose, remember that tanks and gas are separate purchases, safety features like check valves are worth the small upcharge, and brand reputation pays off over years of ownership. Pick the kit that matches your actual workload, not the kit with the biggest numbers on the spec sheet. Your future self will thank you every time you fire up the torch.