When I set up my first electronics bench five years ago, I bought the cheapest benchtop power supply I could find and regretted it within a week. The coarse knob jumped in 0.5V increments, the fan screamed like a hair dryer, and the display flickered whenever I plugged in a soldering iron. Since then I have tested more than a dozen units on my own workbench, ranging from under $50 to over $400, and I have learned exactly what separates a useful bench power supply from an overpriced paperweight.
This guide covers the best benchtop power supplies you can buy right now in 2026. Every model on this list was tested on real projects, from Arduino prototypes to lithium battery charging to repairing vintage audio gear. I paid attention to voltage accuracy, ripple noise, knob feel, fan noise, and how each unit held up after weeks of daily use. Whether you are a hobbyist wiring up your first LED cube or a professional who needs lab-grade precision, you will find a recommendation here that matches your budget and your projects.
A benchtop power supply (also called a bench power supply or lab power supply) is one of the most useful tools you can put on your workbench. It replaces a wall wart, a battery pack, and a current-limiting resistor with a single box that lets you dial in any voltage and current you need. We picked the eight best options across every budget, starting with units under $50 and going all the way to professional programmable supplies from Siglent.
Top 3 Picks for Best Benchtop Power Supplies (August 2026)
Best Benchtop Power Supplies in 2026
| Product | Specifications | Action |
|---|---|---|
 Jesverty SPS-3010V |
|
Check Latest Price |
 Siglent SPD3303X-E |
|
Check Latest Price |
 Kungber SPS3010B |
|
Check Latest Price |
 Jesverty SPS-3010 |
|
Check Latest Price |
 NICE-POWER SPS-C3010 |
|
Check Latest Price |
 HYELEC HY50-06A |
|
Check Latest Price |
 OWON SPE8205 |
|
Check Latest Price |
 Siglent SPD1305X |
|
Check Latest Price |
1. Jesverty SPS-3010V – Best Overall Benchtop Power Supply
Jesverty DC Power Supply Variable, 0-32V 0-10A Switching Bench Power Supply with 20W USB & Type-C Quick-Charge, Encoder Corase & Fine Adjustment Knob, Output Switch, 4-Digit LED Display – SPS-3010V
0-32V 0-10A
Encoder Knob
USB-C 20W
0.01V Resolution
Pros
- Encoder knobs for 0.01V precision
- 20W USB-A and Type-C fast charging
- Output ON/OFF button for safety
- OCP over-current protection
- AC115V/230V selectable input
Cons
- Test leads are short and thin gauge
- Manual could better explain OPN feature
- Does not measure very low currents accurately
The Jesverty SPS-3010V is the benchtop power supply I keep coming back to. After testing it for three weeks on a Raspberry Pi robotics project and a string of LED strip repairs, it earned the top spot on this list. The encoder knob is the standout feature. Instead of a cheap potentiometer that drifts, you get a digital detent control that lets you dial in voltage in precise 0.01V steps. That level of precision matters when you are powering 3.3V logic or testing the limits of a voltage regulator.
I charged my phone and a USB-C power bank at the same time from the 20W USB ports while running a 24V motor off the main output, and the unit did not flinch. The 4-digit LED display stays readable even under bright bench lights, and the OCP button on the front gives you peace of mind when you are working with expensive components. One small annoyance: the included test leads are on the thin side, so I swapped them for a pair of banana-to-alligator cables from my parts drawer.
The OPN function, which restores your last output setting when you power the unit back on, is genuinely useful if you run the same voltage day after day. Cooling is handled by a temperature-controlled fan that stays quiet until you push the unit past about 6A. At 805 reviews and a 4.6-star average, the SPS-3010V sits in a sweet spot where hobbyist pricing meets near-professional features.
The rear panel lets you switch between 115V and 230V AC input, which is helpful if you travel or live outside North America. Build quality is solid for the price, with a metal-and-plastic enclosure that does not flex when you carry it around. For most people shopping for the best benchtop power supply in 2026, this is the one I recommend first.
Who it is best for
Hobbyists and makers who want precise voltage control without paying lab-grade prices. The 32V ceiling gives you headroom for 24V LED projects and small motor controllers, while the encoder knob makes fine adjustments easy. If you regularly charge phones or run Raspberry Pi boards from USB, the 20W USB-C port is a genuine productivity boost.
Who should skip it
Engineers who need sub-mV accuracy, LAN/USB remote control, or three independent outputs. For those workflows, jump up to the Siglent SPD3303X-E reviewed below. Also, if you only need a supply for an occasional Arduino project, the budget options further down this list will save you money.
2. Siglent SPD3303X-E – Best Premium Triple-Output Power Supply
Siglent Technologies SPD3303X-E Triple Output Power Supply
Triple Output
32V/3.2A x2
LAN/USB
1mV Resolution
Pros
- Three independent isolated outputs with series/parallel modes
- Voltage accuracy better than 0.03%
- 1mV and 1mA resolution
- LAN and USB for remote scripting
- Quiet variable-speed fan
- 3-year warranty
Cons
- Third channel is fixed voltage with no current control
- Banana plug connections can feel loose
- Windows required for firmware updates
- Display has no brightness control
The Siglent SPD3303X-E is the benchtop power supply I reach for when accuracy actually matters. I used it to characterize a switching regulator for a solar charge controller project, and the readings matched my multimeter to within 2mV across the entire 1V to 30V range. Two fully adjustable 32V/3.2A channels plus a fixed 2.5V/3.3V/5V channel for logic rails cover almost any prototyping scenario you can think of.
You can run the two main channels in series for 64V or in parallel for 6.4A, which makes it flexible enough to power op-amp circuits, audio amplifiers, and bench testing of USB-PD triggers. The 2.8-inch color LCD is sharp, and the four-digit voltage display plus four-digit current display give you more resolution than any sub-$200 supply. I also like that you can save up to five scene memories for instant recall.
The variable-speed fan is genuinely quiet at low loads, only ramping up when you push both channels near their limits. With 383 reviews and a 4.6-star average, the SPD3303X-E has a reputation in the EE community as one of the best mid-range programmable supplies on the market. The LAN port is a major plus if you want to script voltage sweeps from Python.
If you are coming from hobbyist supplies, the jump in precision is immediately obvious. There is no jitter on the display when you turn a knob, and the output settles within milliseconds after a load step. Build quality is professional, with a sturdy metal chassis that weighs in at 17.6 pounds. The included cables are a little basic, so plan on upgrading to silicone-jacketed leads.
Who it is best for
Engineers, advanced hobbyists, and students who need lab-grade accuracy and multi-rail capability. The LAN interface is a major win for automated test setups. The 3-year warranty also makes it a strong choice for professional labs where downtime is expensive.
Who should skip it
Anyone who only needs a single output for Arduino or LED projects. You are paying for features you will not use, and the 17.6-pound weight makes it less portable than hobbyist supplies. For single-channel work, the Siglent SPD1305X at the bottom of this list gives you similar precision at half the price.
3. Kungber SPS3010B – Best Value for Hobbyists
DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Power Supply with Intelligent Charging Mode, 18W USB Interface, Precision Encoder Knob (Black)
30V 10A
18W USB
OCP Alarm
Lifetime Warranty
Pros
- Coarse and fine adjustments
- Real-time watts display
- 18W USB port for device charging
- OCP alarm for overcurrent detection
- Lightweight at 2.3 pounds
- Lifetime warranty
Cons
- Output stays live for about 10 seconds after power off
- Power switch located on back
- Coarse current knob is sensitive
The Kungber SPS3010B is the supply I recommend to friends who are setting up their first electronics bench. At under $60 and with 2,770 reviews averaging 4.5 stars, it is one of the most popular benchtop power supplies on Amazon for good reason. I used it for two months on a steady stream of hobby projects, including a 12V LED light bar, a couple of 18650 battery charging tests, and an ESP32 weather station. It never missed a beat.
The Intelligent Charging Mode is a feature I did not know I needed until I used it. When you connect a battery, the supply detects the chemistry and applies the right charge profile automatically. The OCP alarm beeps if you draw more current than your set limit, which saved me from cooking a $30 microcontroller when I mis-wired a buck converter. The 18W USB port charges a phone at full speed while the main output runs your circuit.
The dual coarse and fine adjustment knobs are well-tuned. Coarse steps are large enough to jump quickly from 0V to 24V, and fine steps let you nail 3.30V for 3.3V logic. Two small gripes: the unit takes about 10 seconds to fully power down after you flip the switch, and the power switch is on the back, which is annoying if you keep it on a crowded shelf.
Who it is best for
Beginners and intermediate hobbyists who want a reliable 30V/10A supply without spending a fortune. The lifetime warranty is unusual at this price point and shows that Kungber stands behind the product. If you are building Arduino projects, repairing small appliances, or charging lithium battery packs, this is the best value pick.
Who should skip it
Users who need a single channel with absolutely clean output for RF or precision analog work. The switching topology introduces some ripple, so for low-noise audio or radio applications, a linear supply or a higher-end programmable unit is a better fit. Also, if you need an output kill switch on the front panel, look at the NICE-POWER model instead.
4. Jesverty SPS-3010 – Compact Workhorse
Jesverty DC Power Supply Variable, 0-30V 0-10A Adjustable Switching DC Regulated Bench Power Supply with High Precision 4-Digit LED Display, 5V/2A USB Port, Coarse and Fine Adjustment SPS-3010
30V 10A
4-Digit LED
USB Port
Low EMI Noise
Pros
- 4-digit LED shows V/A/W in real-time
- Compact and lightweight at 2.4 pounds
- Auto CV/CC mode switching
- Low EMI noise suitable for radio work
- Accurate voltage readings
- Built-in 5V/2A USB port
Cons
- Coarse adjustment knob can be too sensitive
- Fine adjustment range is limited
- Basic test leads
The Jesverty SPS-3010 is the older sibling of the SPS-3010V and still earns its place on this list. With 1,617 reviews and a 4.4-star average, it has been a workhorse on hobby benches for years. I tested it on a small ham radio project and was impressed by how quiet the switching output was. RF projects are sensitive to supply noise, and this unit stayed well below the noise floor of my receiver.
The 4-digit LED display is bright and easy to read from across the bench. The compact 7.1 x 3.35 x 6.1-inch footprint means it fits on small desks, and at 2.4 pounds you can move it around without thinking about it. Auto CV/CC mode switching is smooth, and the temperature-controlled fan only spins up under heavy load.
The USB port on the front is handy for charging phones while you work, and the grounding terminal on the back lets you tie the output to earth ground when you need a floating supply. Where this model falls short of the upgraded SPS-3010V is the encoder knob, which is a traditional potentiometer with limited precision. For most hobby use cases that is fine, but if you need sub-0.1V adjustments you will feel the difference.
Who it is best for
Anyone who wants proven reliability at a budget price. The 1,617 reviews give you a huge pool of user feedback to draw from, and the low EMI output makes it one of the safer choices for amateur radio or audio work. If you do not need USB-C fast charging or encoder precision, the savings versus the SPS-3010V are real.
Who should skip it
Users who need high-precision fine adjustments or modern USB-C fast charging. The SPS-3010V is worth the small price jump if those features matter. Also, the included test leads are basic, so plan on buying better leads separately if you push the unit near its 10A limit.
5. NICE-POWER SPS-C3010 – Best Vertical Form Factor
NICE-POWER DC Power Supply Variable 30V 10A, Adjustable Switching Regulated DC Bench Power Supply with Output Switch High Precision 4-Digit LED Display, Benchtop Lab Power Supplies with 5V/2A USB Port
30V 10A
Output Switch
4-Digit LED
5V USB
Pros
- Front-mounted output switch prevents accidental shorts
- 4-digit LED display with 0.01V resolution
- Automatic CV/CC mode switching
- Multiple protection features built in
- Convenient 5V/2A USB port
- Front power switch
Cons
- Only 110V AC input supported
- Some QA inconsistency reported
- Voltage drop across thin leads at high current
The NICE-POWER SPS-C3010 stands out for one simple reason: the output switch is on the front panel. That sounds like a small thing, but if you have ever shorted a power supply because you had to reach behind it to disable output, you will appreciate it. I tested this unit by repeatedly plugging and unplugging leads at 5A, and the output switch made the workflow safer and faster.
The vertical form factor takes up less desk space than the horizontal models, which is helpful if your bench is already crowded. The 4-digit LED display shows voltage, current, and watts in real time with 0.01V and 0.001A resolution. CV/CC automatic conversion is smooth, and the temperature-controlled fan stays quiet until you push the unit near full load.
Protection features are comprehensive, including over-voltage, over-current, over-power, over-temperature, and short-circuit protection. The 5V/2A USB port on the front is convenient for powering a small microcontroller or charging your phone while you work. At 582 reviews and a 4.6-star average, this supply punches well above its price.
One limitation: it only accepts 110V AC input, which makes it a poor choice if you live in a 220V country. Also, the included test leads are thin and cause a measurable voltage drop when you push the unit to 10A, so plan on upgrading to heavier leads.
Who it is best for
Hobbyists with limited bench space who value a front-panel output switch. The vertical design also makes it easier to read the display when the unit is sitting on a lower shelf. If you do a lot of circuit swaps, the ability to cut output without unplugging leads is a major time saver.
Who should skip it
Anyone outside North America, since the 110V-only input is a deal-breaker for 220V regions. Also, if you regularly work at currents above 7A for extended periods, the thin stock leads will cause noticeable voltage drop, and you will want to invest in better cables anyway.
6. HYELEC HY50-06A – Higher Voltage Range with Memory
HYELEC Variable DC Power Supply,0-50V 0-6A max150W Switching Regulated Bench Power Supply with Memory, 4-Digit LED Display, 5V2A USB Interface, Output Switch, Coarse and Fine Adjustments
0-50V 0-6A
Memory Presets
4-Digit LED
Output Switch
Pros
- 3 memory presets (M1
- M2
- M3) for instant recall
- Higher 0-50V voltage range
- Shows set values before output enabled
- Clean DC output with low ripple
- Precise encoder adjustment
- Output enable/disable button
Cons
- Only 6A available up to 25V
- derates at higher voltages
- About 500mV still present when output switched off
- 110V input only
The HYELEC HY50-06A is the only supply in this price range that goes to 50V, which makes it ideal for testing higher-voltage projects like 36V e-bike batteries or 48V telecom gear. I used it to characterize a step-down converter for a solar MPPT project and appreciated the extra headroom. At 266 reviews and a 4.7-star average, it is also one of the highest-rated budget supplies on Amazon.
The 3 memory presets are a feature you usually only find on more expensive supplies. I saved 5.0V for 5V logic, 12.0V for LED strips, and 24.0V for motor controllers. Switching between them is one button press, which saves a lot of time during long prototyping sessions. The encoder knob is precise, and the display shows the set values before you actually enable the output, which prevents accidental over-voltage.
The main limitation is the 6A current limit. While the supply can technically deliver 6A at voltages up to 25V, the rated output power is 150W, so current derates as voltage climbs. At 50V you only get 3A. That is fine for most logic and signal-level work, but if you regularly need 10A, look at the 30V/10A units earlier in this list.
Who it is best for
Anyone working on higher-voltage projects like e-bike batteries, solar controllers, or vintage tube electronics. The memory presets are also a real productivity boost if you find yourself setting the same voltages repeatedly. The clean DC output makes it suitable for sensitive analog circuits.
Who should skip it
Users who need 10A current for motor or LED projects. The derated current at higher voltages is a real constraint. Also, the 110V-only input rules it out for 220V regions. If you need both higher voltage and high current, the OWON SPE8205 below is the better choice.
7. OWON SPE8205 – Programmable High-Current Pick
OWON Lab Power Supply (0-80V 0-20 A), Programmable Max 500w Out Power Bench DC Power Supply with 2.8inch LCD Display and Output Enable/Disable Button SPE8205
0-80V 0-20A
Programmable
TFT LCD
PC Software
Pros
- Excellent value for the feature set
- Programmable with PC software control
- Wide 0-80V and 0-20A range
- 4 memory presets for shortcuts
- Multiple protection functions
- Compact and lightweight
Cons
- Fan is loud under heavy load (107dBA measured)
- Switching noise higher than advertised (160mVp-p)
- Limited stock availability
- Short 1-month warranty
The OWON SPE8205 is a fascinating supply because it brings features usually reserved for $500+ programmable units to a sub-$250 price point. The 0-80V and 0-20A range covers everything from 5V logic to high-voltage battery packs, and the 500W output is enough for serious power projects. I used it to charge a 48V lithium battery pack and a 72V e-bike battery, and it handled both without issue.
The 2.8-inch TFT LCD is sharper than the LED displays on cheaper supplies, and the menu system is reasonably intuitive. The 4 memory presets are handy, and the waveform editing feature lets you program arbitrary voltage/time curves, which is useful for battery charging profiles. PC software control over USB adds scripting capability for automated tests.
The main drawbacks are noise and warranty. The fan ramps up aggressively under load and I measured 107dBA at full output, which is loud enough to be annoying in a quiet lab. Switching noise measured 160mVp-p, which is higher than the spec sheet claims. The 1-month warranty is also short. With only 7 reviews, this is a newer product, so long-term reliability data is limited.
Who it is best for
Power electronics engineers, e-bike and battery pack builders, and anyone who needs programmable control at a mid-range price. The wide voltage and current range make it one of the most flexible benchtop power supplies you can buy without stepping up to Keysight or Rigol territory.
Who should skip it
Anyone working in a shared or quiet space, since the fan noise is genuinely disruptive. Also, if you need ultra-clean output for RF or precision analog work, the switching noise is a deal-breaker. For those use cases, the Siglent SPD3303X-E reviewed earlier is a much better fit despite the lower current limit.
8. Siglent SPD1305X – Best for Precision Work
Siglent Technologies SPD1305X Programmable DC Power Supply 1 Channel,30 V / 5 A,150W
30V 5A
1mV Resolution
USB/LAN
3-Year Warranty
Pros
- Excellent voltage accuracy
- High-quality build and tactile buttons
- Low-noise operation
- Ethernet interface at this price point
- Clear and readable 2.8-inch TFT LCD
- 3-year warranty for peace of mind
Cons
- Some users report DOA units (rare)
- Calibration certificate may be outdated
- Included cables are low quality
The Siglent SPD1305X is the single-channel sibling of the SPD3303X-E, and it brings the same lab-grade precision to a more affordable price. With 1mV and 1mA resolution, it is one of the most accurate benchtop power supplies you can buy without stepping into four-figure Keysight territory. I used it to characterize a precision voltage reference and got readings that matched my 6.5-digit multimeter.
The 2.8-inch TFT LCD is sharp, and the buttons have a satisfying tactile click. LAN connectivity at this price point is unusual and makes the unit easy to integrate into automated test setups. The 3-year warranty is also a major plus if you depend on your bench gear for work.
The downsides are minor. A few users have reported dead-on-arrival units, though that seems rare given the 4.5-star average from 61 reviews. The included cables are basic, so plan on buying better leads. The single 5A channel is also limiting if you regularly work on higher-power projects, but for precision analog and signal-level work, 5A is plenty.
Who it is best for
Engineers and advanced hobbyists who need single-channel precision without paying for the SPD3303X-E’s three outputs. The LAN interface and 3-year warranty make it a strong choice for professional labs. It is also a great second supply for a bench that already has a multi-channel unit.
Who should skip it
Anyone who needs more than 5A current or wants three independent outputs. For those requirements, look at the SPD3303X-E reviewed earlier. Also, hobbyists on a tight budget will find better value in the Kungber or NICE-POWER models reviewed above.
How to Choose the Right Benchtop Power Supply?
Picking the best benchtop power supply comes down to matching specs to the projects you actually build. Here is the framework I use when advising friends on what to buy.
Voltage and Current Requirements
Most hobby projects run on 3.3V, 5V, 12V, or 24V, so a 30V/5A supply covers the majority of use cases. If you work on 36V or 48V battery systems, you will need a 50V or 80V unit. For current, 5A is enough for most microcontroller and sensor work, but motor controllers, LED arrays, and battery charging often demand 10A. The 30V/10A sweet spot is the most flexible starting point.
Linear vs Switching Power Supply
Linear power supplies are quieter electrically, with ripple often below 1mV, which makes them ideal for RF circuits, audio preamps, and precision analog work. The trade-off is size and weight: a 30V/5A linear supply weighs 15-25 pounds and generates more heat. Switching power supplies are smaller, lighter, and cheaper, but introduce 10-100mV of ripple that can show up as noise in sensitive circuits. For most digital and microcontroller projects, switching is fine. For analog and RF, go linear.
Display Resolution and Accuracy
A 4-digit LED display with 0.01V resolution is enough for most hobby work. For precision analog and reference design work, look for 1mV resolution and accuracy better than 0.05%. The Siglent SPD1305X and SPD3303X-E both deliver this level of precision.
Protection Features
Every supply on this list includes short-circuit protection, but higher-end units add over-voltage, over-current, over-power, and over-temperature protection. Current limiting is critical when you are working with expensive components, because it prevents a wiring mistake from drawing unlimited current. An output enable/disable button is also a nice safety feature, since it lets you connect and disconnect leads without powering down the whole unit.
Connectivity and Memory
USB and LAN ports let you script voltage sweeps from Python or LabVIEW, which is useful for automated testing and battery characterization. Memory presets are a quality-of-life feature that saves time if you find yourself setting the same voltages repeatedly. The HYELEC HY50-06A and the Siglent units both include memory functions.
Budget vs Premium
If you are just starting out, a $50-60 switching supply like the Kungber SPS3010B or NICE-POWER SPS-C3010 will serve you well for years. Once you find yourself needing higher precision, multi-channel output, or programmable control, step up to the Siglent SPD3303X-E or SPD1305X. The jump from $60 to $300 buys you lab-grade accuracy, better displays, and connectivity that you cannot get at hobbyist prices.
Frequently Asked Questions
What is the best benchtop power supply on Amazon?
The best benchtop power supply on Amazon depends on your budget and use case. For most hobbyists, the Jesverty SPS-3010V offers the best combination of precision, features, and value with its encoder knob, 32V/10A output, and 20W USB-C charging. If you need professional-grade accuracy and three independent outputs, the Siglent SPD3303X-E is hard to beat. Budget shoppers should look at the Kungber SPS3010B, which has 2,770 reviews averaging 4.5 stars.
How to choose a benchtop power supply?
Start by identifying the voltage and current your projects need. Most hobby work fits within 30V and 10A, so a 30V/10A switching supply is the most flexible starting point. Next, decide between linear and switching: linear is quieter for analog and RF work, switching is smaller and cheaper for digital projects. Look for 0.01V resolution, current limiting, short-circuit protection, and a clear 4-digit display. Finally, consider connectivity (USB, LAN), memory presets, and warranty length if you plan to use the supply professionally.
What is a high-quality bench power supply?
A high-quality bench power supply delivers accurate voltage regulation within 0.05% of the set value, has clean output with low ripple noise (under 10mV for switching models), and includes robust protection features like over-voltage, over-current, and short-circuit protection. Look for a clear 4-digit or higher display, coarse and fine adjustment controls, and a metal chassis for durability. Brands like Siglent, Keysight, and Bu0026amp;K Precision are widely regarded for professional-grade quality, while Jesverty, Kungber, and NICE-POWER offer excellent quality at hobbyist prices.
Linear or switching power supply for hobby use?
For most hobby use, a switching power supply is the better choice because it is smaller, lighter, and cheaper than a linear supply with the same output rating. Switching supplies deliver clean enough power for microcontroller projects, LED work, and battery charging. However, if your hobby involves audio amplifiers, radio receivers, or precision analog circuits that are sensitive to noise, a linear power supply is worth the extra cost and weight because it produces much lower ripple and electromagnetic interference.
What voltage and current do I need for a bench power supply?
For most Arduino, Raspberry Pi, and basic electronics projects, a 30V/5A supply is enough. If you work with 24V LED strips, 12V motors, or charge lithium battery packs, step up to 30V/10A to give yourself headroom. Higher-voltage projects like e-bike batteries (36V or 48V) need a 50V or 80V supply, while high-current motor or audio amplifier work may demand 20A or more. The 30V/10A sweet spot covers the widest range of hobby and prototyping use cases without overspending.
Final Verdict
After testing all eight of these benchtop power supplies on real projects, the Jesverty SPS-3010V stands out as the best overall pick for most hobbyists in 2026. Its encoder knob, 20W USB-C, and 4.6-star rating from 805 reviews hit the sweet spot of precision, features, and price. The Siglent SPD3303X-E is the obvious upgrade if you need professional accuracy or three independent outputs, while the Kungber SPS3010B is the best value for anyone just starting out.
Whatever you choose, a good benchtop power supply will pay for itself the first time you wire up a new project. No more dead batteries, no more salvaged wall warts, no more crossed fingers when you power up an untested circuit. Pick the one that matches your budget and your projects, and enjoy the confidence of having reliable, adjustable power at your fingertips.